AC10 Series AC Variable Frequency Drives
AC10 Variable Speed Drive For Simple, Reliable Motor Control in General Purpose Applications 0.25 - 250 HP (0.2-180 kW), IP20 and IP66.
Key Features
- Economical
- RS485 Modbus Communications
- 0.5% speed and 5% torque accuracy
- DSE Lite Software
Features
- Easy Quick Keypad/Display Setup
- Application Macros
- DSE Lite or PDB Software Config.
- Volts per Hertz or Sensorless Vector Mode
- IP66/NEMA4X Units Through 125 HP
- Heavy Duty rated only
- 230V - 1 Phase to 3 Hp & 3 Phase to 20Hp
- 460V - 3 Phase to 250 Hp
- PID Loop and Auto-Tuning
- Modbus RTU/RS485 Comms.
- Class 3C3 Conformal Coating
- Optional Internal EMC filter
- Internal dynamic brake switch as standard
- Cloning Module Available
- Up to 590 Hz output for high speed operations such as spindles, centrifuges, mixers etc.
AC10 Variable Frequency Drive is a simple, reliable
and economical solution to every-day motor control
applications requiring speed or torque control
within the power range of 0.25 HP to 250 HP, with
NEMA 4X indoor/IP66 version available through
125 HP. Having features normally only associated
with higher specification drives, including sensorless
vector mode, output frequency up to 590 Hz, and
a full 150% overload at 0.5 Hz for 1 minute, AC10
provides an optimized solution for OEM machine
builders looking for a compact, cost-effective drive
without compromising on performance. The AC10
is suitable for either AC induction or permanent
magnet AC motor designs.
Features
Simplicity
AC10 is designed to reduce the time and effort
required to install, setup and commission through
its easy to use integrated keypad. Minimal wiring
requirements and two easily accessed terminal rails
make AC10 fast and simple to install, having you up
and running in no time at all. Auto-tuning sensorless
vector mode takes AC10 beyond simple V/Hz
control allowing users requiring greater dynamic
speed or torque control for their application to
benefit from the drives enhanced 0.5% speed and
5% torque accuracy.
Reliability
Proven technology and manufacturing techniques
ensure AC10 has been engineered and built
to deliver consistently outstanding levels of
performance day in, day out ensuring maximum
uptime and productivity. Thanks to its conformally
coated PC boards, AC10 is able to withstand even
the most severe class 3C3 environment which
many other drives in this class would struggle with,
allowing you to operate AC10 with the utmost
confidence in more applications. For the ultimate in
protection, IP66 rated models are available
Inverter Duty
AC Induction Motors
An ideal complement to AC10,
an inverter duty AC motor
matched to the AC10 will
provide you with a complete
motor/drive package for
optimal performance in your
application.
AC10 Drives Range
One of the smallest microdrives
available and with five
different frame sizes covering
a power range of 0.25 HP
through to 250 HP, AC10 is
a low-cost, compact solution
for simple AC induction motor
control in a wide range of
applications across a host of
different industries.
AC10 IP66/NEMA4X
IP66/NEMA 4X (indoor)
apply to IEC standard
60529-2004 and NEMA
standards, and assess the
capability of an enclosure to
resist specific environental
conditions. IP66/NEMA 4X
protection represents dust
tight performance as well
as the ability to withstand
powerful water jets from all
directions. Parker’s AC10
IP66/NEMA 4X series offers all
the great benefits of the AC10
series drives but with added
environmental protection.
• IP20 230V: ¼ - 20 HP
• IP20 460V: ¼ - 250 HP
• IP66 230V: ½ - 3 HP
• IP66 460V: 1 - 125 HP
• SCCR meet 100kA rating with recommended fuses