domnick hunter
DBA Series Blower Purge Heat Reactivated Desiccant Air Dryer
DBA Series Blower Purge Heat Reactivated Desiccant Air Dryer
Key Features
- Flow range starting at 500 scfm (850 m3/hr)
- Delivered air quality is in accordance with ISO 8573-1:2001, the international standard for compressed air quality.
- Pressure dewpoints of -100°F (-70°C) & -40°F (-40°C) (ISO 8573-1 :2001 Classes 1 & 2) are available.
- Parker domnick hunter High Efficiency OIL-X EVOLUTION pre- and after compressed air filters - Standard
- Energy Management System available (Dewpoint Dependent Switching (DDS)) - Optional
- High-efficiency, quiet running regenerative (up to 3000 scfm) or centrifugal blowers (4000 scfm and larger)
- Parker non-lubricated full-flow angle seat valves, which carry a FIVE YEAR WARRANTY, are standard on dryers up to 800 scfm.
- High performance, rotary actuated switching valves, which carry a FIVE YEAR WARRANTY, are standard on dryers 1000 scfm and larger.
- Insulated tower, heater and purge lines increase dryer performance and efficiency by reducing radiant heat loss plus keeps the unit with the safety parameters set forth by OSHA.
- Easy to use eControl Center affords superior dryer control along with digital telemetry for remote analysis of performance.
Parker domnick hunter DBA Series Externally Heated Blower Purge Desiccant Air Dryers use the adsorption method to remove moisture from compressed air, and combine heat with forced ambient air to affect regeneration.
Performance Characteristics | |
---|---|
Brand | domnick hunter |
Pre-installed Optional Accessories | Pre and After Filtration |
Connection Type | 1" NPT, 1 1/2" NPT, 1 1/2" NPT, 2" NPT, 3" Flg, 4" Flg, 6" Flg, 8" Flg |
Maximum Flow Rate (m³/h) | 170, 340, 510, 680, 850, 1019, 1359, 1699, 2038, 2548, 3398, 4417, 5097, 6796, 8495, 10194, 12743, 15291 |
Rated Inlet Pressure (psi) | 100.0 |
Maximum Operating Pressure (psi) | 150, 135 |
Minimum Operating Pressure (psi) | 80 |
Maximum Operating Temperature (F) | 120 |
Minimum Operating Temperature (F) | 50 |
Maximum Ambient Temperature (F) | 120 |
Minimum Ambient Temperature (F) | 40 |
Purge Rate | 0 |
Weight (lb) | 1050, 1500, 1900, 2180, 2840, 3420, 4490, 5700, 6300, 7165, 9850, 12210, 12650, 18910, 21590, 24890, Consult Factory |
Width (inch) | 49, 56, 43, 47, 50, 52, 64, 74, 78, 114, 132, 168, 156, 146, Consult Factory |
Depth (Inch) | 37, 39, 27, 28, 35, 41, 60, 66, 72, 84, 92, Consult Factory |
Height (inch) | 83, 85, 87, 88, 89, 92, 93, 102, 113, 112, 114, Consult Factory |
Prefilter Part Number | AA025ENFI, AA030GNFI, AA035GNFI, AA040HNFI, AA045HNFI, AA050INFI, AA055JNFI, DH-AA250NDFI-1, DH-AA250ODFI-1, DH-AA300ODFI-1, DH-AA350PDFI-1, DH-AA400PDFI-1, Consult Factory |
After Filter Part Number | JC0150-FH, JC0350-FH, JC0450-FH, JC0625-FH, JC0800-FH, JC1008-FH, FT3-801-HT, FT4-1201-HT, FT4-1201-HT1, FT6-1201-HT, FT6-1201-HT1, FT6-1803-HT, Consult Factory |
Prefilter Replacement Element | 025AA, 030AA, 035AA, 040AA, 045AA, 050AA, 055AA, 060AA, (3) 060AA, (4) 060AA, (6) 060AA, (10) 060AA, Consult Factory |
Afterfilter Replacement Element | JE-FC0150-HT, JE-FC0350-HT, JE-FC0450-HT, JE-FC0625-HT, JE-FC0800-HT, JE-FC1330-HT, JE-FE1500-HT, JE-FC3000-HT, JE-FC4000-HT, (3) JE-FC2500-HT, Consult Factory |
Installed Condensate Drain | Timed Solenoid Drain, Demand Solenoid Drain |
Dryer Technology | Desiccant, Blower Purge |
Type | Blower Purge |
Catalogs