Noshok
1100 Series Diaphragm Type Differential Pressure Gauges
1100 Series Diaphragm Type Differential Pressure Gauges
Key Features
- Precisely measures pressure drops across filters, strainers, separators, heat exchangers and applications where a higher level of solids are present in the measuring media
- High side is completely isolated from low side to prevent fluid movement between ports
- Maximum static or working pressure to 3,000 psi; 1,500 psi with brass housing
- 2-1/2" and 4-1/2" sizes – top & bottom, or back connected
- Sensor housing is cast in a black anodized aluminum, 316L stainless steel or brass and comes standard with a weather-resistant NEMA 4X enclosure and shatter-resistant acrylic lens
- Optional liquid filling lubricates gauge internals and extends service life by dampening the effects of vibration, pulsation and shock
- Convoluted diaphragm fully supported to the rated working pressure of the gauge
- Shipped with a certificate of calibration to ensure accuracy and quality performance
Application:
- Filters
- Flow indicators
- Heat exchangers
- Back flow restrictors
- Hydraulic and pneumatic systems
- Water treatment systems
- Pumps and compressors
- Industrial machinery and machine tools
SPECIFICATIONS | |
Nominal sizes | 2-1/2" (63.5 mm) 4-1/2" (114.3 mm) |
Case and bezel material | Fiberglass reinforced thermoplastic |
Lens | Acrylic (standard) Laminated safety glass (optional) |
Sensor housing material | Black anodized aluminum (standard) 316L Stainless steel (optional) Brass (optional) |
Sensor material | 316 Stainless steel and ceramic magnet |
O-ring material | NBR ( standard) FKM (optional) EPDM (optional) |
Process connection | 1/4" NPT female, back connection (standard) 1/4" NPT female, top & bottom (optional) |
Accuracy | ±2% full scale for ranges 0 psid to 15 psid &
above ±5% full scale for ranges below 0 psid to 15 psid |
Dial | Aluminum, white background with black markings. |
Pointer | Balanced aluminum, black finish |
Gauge fill fluid | Glycerine (optional) others available (please consult factory) |
Operating temperature | -40 °F to 200 °F (-40 °C to 93 °C) |
Ranges | 0 to 50 in H20 through 0 psid to 100 psid |
Max. working static pressure | 3,000 psig - 316L stainless steel and aluminum housing
1,500 psig - brass housing |