Parker Pneumatic
HRN Series Hydraulic Rotary Vane Actuator
HRN Series Hydraulic Rotary Vane Actuator
Key Featueres
- SHAFT AND VANE - A one piece shaft, vane and seal with a rounded vane design provides high strength while reducing vane seal bypass.
- REFERENCE POINT - Starting points given relative to porting flats.
- SHAFT - A standard, double ended shaft allows for manual override. Note: the rear shaft is square cut.
- BODY - A three piece, precision machined body incorporates a rounded vane design, virtually eliminating vane seal bypass.
- SHAFT BEARINGS - The shaft and vane assembly is supported by two rolling element bearings.
- SINGLE OR DOUBLE VANE OPTIONS
- Rated Operating Pressure: 7 MPa (1000 psi)
- Minimum Operating Pressure: 1 MPa (145 psi)
- Output Torque @ 7 MPa: 10 to 1960 N•m (89 to 17346 in-lb)
- Standard Rotations: 90° to 270°
- Operating Temperature Range: 0°C to 60°C (32°F to 140°F)
- Filtration Requirement: ISO Class 17/14 Cleanliness Level
- Mounting Orientation: Unrestricted
- Standard Keyway Timing: See Figures for Start Position
Catalogs
HRN / HRN-C Section HY03-1800
919.6 kB