Parker Pneumatic
P1V-A Series Air Motors

Model Series

  • P1V-A160 
  • P1V-A260 
  • P1V-A360

P1V-A is a range of reversible air motors intended for heavy and demanding applications. The motor housings are made from painted cast iron, and the components sealed to permit operation in damp and dirty environments.

The range contains three different sizes, P1V-A160, P1V-A260 and P1V-A360, with power ratings of 1600, 2600 or 3600 Watts.  The basic motors can be supplied with built-in gearboxes, either planetary, helical or worm drive, to provide the correct speed of rotation and torque, and the correct installation mountings. 

Click to Enlarge

DESIGN DATA

Basic motor

  • Robust design with few components
  • Spring loaded vanes as standard give good starting and low speed characteristics
  • Keyed output shaft
  • Reversible operation

Planetary gear

  • Precision made gears with efficiency over 95%
  • Sealed, permanently grease lubrication gives free installation position
  • Compact installation and low weight
  • Central output shaft

Helical gear

  • Two versions available, with flange or foot
  • High efficiency, 90 to 95%
  • Oil-bath gearboxes mean that the installation position must be decided in advance. The installation position determines the volume of oil in the gearbox and location of oil filling and drain plugs.

Worm gear

  • Available in three versions, for installation with left-hand flange, right hand flange or foot mounting.
  • Compact size and low weight
  • Self-locking in higher ratios
  • Output shaft at 90° angle to motor spindle
  • Hollow output shaft with key slot. Single-ended or "through" twin shaft as options.
  • Oil-bath gearboxes mean that the installation position must be decided in advance. The installation position determines the volume of oil in the gearbox and location of oil filling and drain plugs.

  • Working pressure Max 7 bar
  • Working temperature -30 °C to +100 °C
  • Medium 40 µm filtered air with or without oil mist

Material specification

Basic motor

  • Housing Cast iron, synthetic paint, black
  • Spindle, rotor High grade steel
  • Key Hardened steel
  • O-rings Nitrile rubber, NBR
  • Screws Zinc-coated steel

Planetary gear

  • Housing Alloy steel, synthetic paint, black
  • Shaft High grade steel
  • Key Hardened steel
  • Shaft seals Nitrile rubber, NBR
  • Screws Zinc-coated steel

Helical gear

  • Housing Aluminium or cast iron, synthetic paint, black
  • Shaft High grade steel
  • Key Hardened steel
  • Shaft seals Nitrile rubber, NBR
  • Screws Zinc-coated steel

Worm drive gear

  • Housing Aluminium or cast iron, synthetic paint, black
  • Shaft High grade steel
  • Key Hardened steel
  • Pinion Chill cast phosphor bronze
  • Worm Alloyed, hardened steel
  • Shaft seals Nitrile rubber, NBR
  • Screws Zinc-coated steel

Accessories

  • Keyed shafts for worm gear
  • Shaft High grade steel
  • Key Hardened steel