Parker Pneumatic
P1V-S Series Stainless Steel Air Motors
  • All External Stainless Steel Components
  • Reversible
  • Vane

P1V-S is a range of air motors with all external components made of stainless steel, which means that they can be used in food grade applications, and in all other applications where there is a risk of corrosion.  

The range contains seven different sizes, with powers ranging from 20 to 1 200 Watts, and speeds from 5 to 24 000 rpm. 

  • No-lube intermittent operation as standard
  • External seals in fluor rubber (FPM)
  • Ideal for food industry applications (shape and FDA approved grease)
  • 0,2kW and 0,3kW Brakemotors for higher safety
  • Drilling, milling and grinding motors

CAD files   (Registration Required)

Quote Request
Click to Enlarge

The air motor and planetary reduction gear are built into a polished stainless steel housing, which is sealed by a fluor rubber O-ring. The output shaft, which is made of polished stainless steel, is also sealed by a fluor rubber seal.

Consideration for achieving a clean, hygienic design was given early on in the development of this range of air motors. Thanks to the cylindrical shape, there are no pockets which can accumulate dirt or bacteria.  Additionally, the two halves of the motor body are sealed with an o-ring to prevent contamination. The choice of materials reflects the fact that aggressive cleaning materials are used in food grade applications.

The P1V-S series is designed to be operated in intermittent intervals under non-lubrication conditions. For this reason, no particles of lubricant escape with the exhaust air and the service costs are reduced. This means that the motors can be used directly in food grade applications. The planetary gear, which has one or more reduction stages, is lubricated with an USDA-H1 standard grease, approved for use in food grade applications. 

Technical data

  • Working pressure   Max 7 bar (max 6 bar in explosive atmospheres)
  • Working temperature -30 °C to +100 °C
  • Ambient temperature -0 °C to +40 °C in explosive atmospheres
  • Medium    40 µm filtered, oil mist or dry unlubricated compressed air

Material specification

Planetary gearbox for:

P1V-S060A0010 /30 /48, P1V-S10A001 /3 Stainless steel, X46Cr13

Planetary gearbox for last planet stage incl. installation flange

P1V-S00A0011 /06, P1V-S030A003 /10   Black oxidised steel (not stainless)

All other housings   Stainless steel, X1CrMoS17

Spindle*    Hardened stainless steel, X0Cr13

Key*    Hardened stainless steel X6CrNiMoTi17-1-

External seal   Fluor rubber, FPM

Internal steel parts   High grade steel (not stainless)

Planetary gear grease USDA-h1 approved

* P1V-S00A0011/06 and P1V-S030A003/10

Key and Shaft    High grade steel (not stainless)

Screws in housing in last planet stage Surface treated steel (not stainless)

Flange bracket   Stainless steel, X1CrMoS17

Foot bracket   Stainless steel, X5CrNi18

Screws for bracket Stainless steel DIN A