Parker Fluid Connector Group
304 Series Phosphate Ester 2 Braids Hydraulic Hose
304 Series Phosphate Ester 2 Braids Hydraulic Hose
Key Features
- Up to 5000 psi
- Dimensionally conforms to SAE 100R2 Type AT specification
- Uses Parkrimp 43 Series fittings, providing the widest selection of end configurations available anywhere
Click to Enlarge
Parker's 304 phosphate-ester compatible hose is for medium pressure applications up to 5000psi. Offers the widest size range: -4 through -32. Dimensionally conforms to SAE 100R1 Type AT specification. Uses Parkrimp 43 Series fittings.
Applications
- Industrial
- Ground Support Equipment
| Media | Petroleum base hydraulic fluids and lubricating oils |
| Hose I.D. Minimum(inch) | 1/4 |
| Hose I.D. Minimum(mm) | 6,3 |
| Maximum Working Pressure (psi) | Up to 5000 |
| Hose I.D. Maximum(inch) | 2 |
| Hose I.D. Maximum(mm) | 51 |
| Maximum Working Pressure (Mpa) | Up to 34,5 |
| Material - Hose Inner Tube | EPDM Rubber |
| Material - Hose reinforcement | Two braids steel wire |
| Material - Cover | EPDM rubber, green |
| Minimum Bend Radius (inch) | Meets SAE requirements |
| Minimum Bend Radius (mm) | Meets SAE requirements |
| Working Temperature (F) Oil Minimum | -40 |
| Working Temperature (F) Oil Maximum | +176 |
| Working Temperature (C) Oil Minimum | -40 |
| Working Temperature (C) Oil Maximum | +80 |
| Compatible Fittings | 43 series |
Catalogs
304 Series Phosphate Ester 2 Braids Hydraulic Hose Catalog