XN300 Slice Card Modular I/O System
XN-300 Key Features
- High Density
- Modular
- Slice Card Based
- CANopen
- Assist Software
Modules
CANOPEN GATEWAY MODULE
DIGITAL, 20 INPUT, P, 24VDC, 5.0MS
DIGITAL, 20 INPUT, P, 24VDC, 0.5MS
DIGITAL, 20 INPUT, P, 24VDC, 2/4 CNT, 25KHZ
DIGITAL,16 OUTPUT, P, 24VDC, 0.5A, SP
DIGITAL,12 OUTPUT, P, 24VDC, 1.7A, SP
ANALOG, 8 INPUT, 0/4-20MA
ANALOG, 6 INPUT, +/-10V, 1 PT/KTY, UREF
ANALOG, 8 INPUT, THERMO ELEMENT, 2 KTY
ANALOG, 4 INPUT, PT/NI/KTY/R, 2/3 WIRE
ANALOG, 8 OUTPUT, +/-10V
ANALOG, 4 IN-/4 OUTPUT, +/-10V, UREF
COUNTER, 1 CNT, 125KHZ, 16BIT, 4 DO, 4 DI
WEIGH MODULE, 2DMS, 24BIT
DC-MOTOR DRIVER, 12-30V, BRUSH,3.5A
SERIAL, 2 SSI, RS422, 32BIT
POWER SUPPLY, 4 X 24VDC/2A, SP
POWER DISTRIBUTION, 18 CHANNEL, GND
POWER DISTRIBUTION, 18 CHANNEL, VCC
XN300 – This ultra-compact, slice-card-based modular I/O system with a plug-in, high-density connection system can be combined with HMI PLC products in order to create a system solution that is just perfect for the application in question. In addition, application-oriented functions result in lower device costs and make it possible to obtain the perfect system solution while taking up a minimal amount of space. All this is combined with a sleek design and a practical installation concept that make handling easier and allow users to pre-assemble their I/O block and install sensors and actuators in advance. The plug-in connection system, together with clear signal allocation, make commissioning easier and round off the system's characteristics in order to make it the perfect solution for the needs of machine building applications meant for use in mass production environments.
Special features:
- Ultra-compact, slice-card-based modular I/O system with a field bus interface and high channel density.
- Application-oriented functions that result in lower device costs and make it possible to obtain the perfect system solution while taking up a minimal amount of space.
- A sleek design and a practical installation concept that make handling easier and allow users to pre-assemble their I/O block.
- A plug-in connection system and clear signal allocation make commissioning faster and maintenance easier.
- The XN300 Assist software tool supports engineering and commissioning.
- Rounds off our range of XV products (HMI PLC), making them just the perfect solution for the needs of machine building applications meant for use in mass production environments.
XN-312-GW-CAN
XN-322-20DI-PD
XN-322-20DI-PF
XN-322-20DI-PCNT
XN-322-16DO-P05
XN-322-12DO-P17
XN-322-8AI-I
XN-322-7AI-U2PT
XN-322-10AI-TEKT
XN-322-4AI-PTNI
XN-322-8AO-U2
XN-322-8AIO-U2
XN-322-1CNT-8DIO
XN-322-2DMS-WM
XN-322-1DCD-B35
XN-322-2SSI
XN-322-4PS-20
XN-322-18PD-M
XN-322-18PD-P