Eaton Electrical
Pushbutton Control Stations - Assembled
Pushbutton Control Stations - Assembled
M22 Assembled Control Stations
- M22 series operators
- Available in horizontal and vertical configurations
- Impact resistant polycarbonate enclosures
- Optional yellow covers
- Base mounting contact blocks and light units for quick wiring and vibration resistance
Commercial Control Stations
- 10250T series operators
- Full front label
- Specific function labels on front of enclosure
General Purpose Control Stations
- Construction grade
- General purpose wall mount
- Popular with contractors
- UL (NEMA) Type 1
Special Purpose Control Stations
- Standard grade
- Polyester enclosure
- UL (NEMA) Type 3, 3R, 4, 4X, 13
10250H Series Heavy-Duty Control Stations
- 10250H Series operators
- Dark brown polyester enclosure
- Protective rubber gaskets provide NEMA 3S rating on pushbuttons
- Top and bottom 3/4 in NPT conduit entrances
- Includes alternate legend plates and spare mounting screws
10250T Series Heavy-Duty 30.5mm Control Stations
- 10250T Series operators
- ASA 61 gray die-cast zinc enclosures
- Surface or flush mounting
- Single 3/4 in NPT conduit entrance on one and two element stations
- Single 1 in NPT conduit entrance on three element stations
Class I Division 2 10250T Series Heavy-Duty 30.5 mm Control Stations
- 10250T Series operators
- Factory sealed contact blocks
- Die-cast, polyester or stainless steel enclosures
- Approved for NEC Class I Division 2, Groups B, C and D or Class I Zone 2 Group IIB plus Hydrogen type hazardous locations
Class I Division 2 E34 Series Corrosion Resistant 30.5 mm Control Stations
- E34 Series operators
- Factory sealed contact blocks
- Die-cast, polyester or stainless steel enclosures
- Approved for NEC Class I Division 2 Groups B, C and D or Class I Zone 2 Group IIB plus Hydrogen type hazardous locations
M22 Assembled Control Stations
- IP66, UL (NEMA) Type 4X, 13
- Impact resistant polycarbonate enclosures
- Optional yellow cover
- 25% smaller depth than most competitor enclosures
- Base mounting contact blocks and light units for faster wiring and vibration resistance
Commercial Control Stations
- ASA 61 gray die-cast zinc enclosures
- Pre-assembled and labeled for functions such as “Fuel Shut-Off”
- Great for commercial applications
General Purpose Control Stations
- Construction grade
- General purpose wall mount
- Popular with contractors
- UL (NEMA) Type 1
Special Purpose Control Stations
- Standard grade
- Polyester enclosure
- UL (NEMA) Type 3, 3R, 4, 4X, 13
10250H Series Heavy-Duty Control Stations
- Industrial grade
- Extra heavy-duty
- Polyester enclosure
- Booted buttons
- Outdoor installation
- UL (NEMA) Type 3, 3R, 3S, 4, 4X, 12, 13
10250T Series Heavy-Duty 30.5mm Control Stations
- 30.5 mm operators
- Industrial grade
- Zinc die cast enclosure
- Popular with industrial end users
- UL (NEMA) Type 4, 4X, 12, 13
Class I Division 2 Control Stations
- Available with 10250T or E34 30.5 mm operators
- Zinc die cast, polyester or stainless steel enclosures
- Factory-sealed contact blocks
- Popular with industrial end users
- UL (NEMA) Type 4, 4X, 12, 13
- NEC Class I Division 2 Groups B, C and D
Catalogs