Parker Fluid Connector Group
Exactol® Crank-Operated Benders - Model 412/424
Exactol® Crank-Operated Benders - Model 412/424
These portable benders are vise or bench mountable for easy action and fast accurate bending to 180*. Two models are available to bend tube sizes 4 (1/4") through 24 (1 1/2"). Exactol benders are designed with a worm-gear drive with a 60 to 1 gear ratio to allow accurate bending with minimum effort. They bend aluminum, copper, annealed steel and annealed stainless steel without kinks or wrinkles. Easy crank operation permits continuous production without excessive operator fatigue; for use in tube fabrication shops, in the field, or in the factory maintenance departments.
A video (on DVD) is included to provide proper instructions for use.
Click to Enlarge
Exactol Model 412
Will bend tube from size 4 (1/4") through size 12 (3/4") and 6mm through 20mm inclusive and is completely portable. Accessories include a sturdy metal carrying case, which accommodates the 412 bender, slide block, and selected radius blocks. See page R7 for wall thickness capabilities. May be held in a vise or bench mounted using bench mounting adapter. Bulletin 4391-B400S and DVD are included with bender, which describe the operation in detail.
Note: The 412 must be bench mounted if mandrels are used.
Exactol Model 424
The Exactol Model 424 will bend tube from size 4 (1/4" OD) through size 24 (1 1/2" OD) and 6mm through 38mm inclusive. See page R7 for wall thickness capabilities. It is completel portable and may be vise or bench mounted. Bulletin 4391-B400S and video are included with the bender, which describe operation in detil.
Note: The 424 must be bench mounted if mandrels are used. A video (on DVD) is included to provide proper instructions for use.
Catalogs
Catalog Pages
78.9 kB