Parker Industrial Hose
7132 Series LP Gas Hose UL21, CGA Type I

Series 7132 is a flexible, lightweight liquefied petroleum gas (LPG)/propane delivery and transfer hose. The hose meets all Underwriters Laboratories (UL21) and Canadian Gas Association (CGA Type I) requirements. The construction incorporates multiple textile plies of reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone. Series 7132 is available in long lengths on reels, long cut lengths and factory-tested assemblies from stock in popular configurations.

Applications

  • Bobtail Delivery
  • Grills & Cookers
  • Heaters
Model Series
  • 7132-19352, 7132-25354, 7132-31354, 7132-38354, 7132-50354, 7132-50354, 7132-75354, 7132-75354100, 7132-75354125, 7132-75354150, 7132-100354, 7132-100354100, 7132-100354125, 7132-100354150, 7132-100354200
Quote Request
Click to Enlarge

Series 7132 and DOT: LPG hose assemblies installed on on-road vehicles must meet Department of Transportation (DOT) requirements. Factory assemblies (3/4" and larger) are pressure tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each assembly. Metal DOT identification bands are also available/attached for an additional charge at customer request. Contact Parker.

Series 7132 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7132 may be used for natural gas service, but ONLY under ALL of the following conditions:

  • The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
  • Series 7132 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.

Series 7132 and Compressed Natural Gas (CNG): Series 7132 is not for use in any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.

Series 7132 and Anhydrous Ammonia (NH3): Series 7132 is not for use with anhydrous ammonia. 

Tube:Black nitrile
Reinforcement:Multiple textile plies
Cover:Black chloroprene; perforated smooth finish
Temp. Range:-40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method:Impression
Brand Example:PARKER SERIES 7132 (ID) CSA® CAN 1-8.1 CGA TYPE I CAUTION - LP GAS HOSE MH6737 C U ® US ISSUE NO. XXXXXX 350 PSI MAX WP MADE IN USA (DATE CODE)
Design Factor:5:1
Industry Standards:UL21; CAN/CGA-8.1-M86 Type I; optional DOT factory hose assembly testing and marking also available for sizes smaller than 3/4
Vacuum:Not recommended
Compare to:Boston Blackline (LPG); Gates LP350; Thermoid Type 75
Packaging:Cartons, coils, reels (“E” suffix in part number indicates UPS-shippable reel under 80 pounds)

Catalogs
7132 Series Catalog 7132 Series Catalog
52.3 kB