Parker Industrial Hose
SS106 Series LP Gas Hose Static Wire ISO 2928-1986 (E)

Series SS106 is a large diameter, heavy duty liquefied petroleum gas (LPG)/propane transfer hose for large volume bulk loading/unloading. The hose construction incorporates multiple plies of textile reinforcement for flexibility and kink resistance, and the perforated cover is resistant to abrasion, oil and ozone. The hose meets ISO 2928-1986 (E) requirements.

Applications

  • LP gas/propane 
  • Bulk loading/unloading; in-plant tank transfer
Model Series
  • SS106-1250, SS106-1500, SS106-2000, SS106-2500, SS106-3000, SS106-4000
Click to Enlarge

Series SS106 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series SS106 may be used for natural gas service, but ONLY under ALL of the following conditions:

  • The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
  • Series SS106 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.

Series SS106 and Compressed Natural Gas (CNG): Series SS106 is not for use in any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.

Series SS106 and Anhydrous Ammonia (NH3): Series SS106 is not for use with anhydrous ammonia. 

Tube:Black nitrile
Reinforcement:Multiple textile plies with static wire
Cover:Black nitrile; perforated wrapped finish
Temp. Range:-40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method:Embossed
Brand Example:PARKER SERIES SS106 (ID) LPG HOSE ISO 2928-1986 (E) 20 BAR 350 PSI WP (DATE CODE) MADE IN USA
Design Factor:5:1
Industry Standards:ISO 2928-1986 (E)
Vacuum:Not recommended
Packaging:Coils

Catalogs