Hydac
WS Series Solenoid Directional Valve

Key Features

  • Leaktight design
  • Low pressure drop
  • Wet armature construction
  • Standard Water/Weather resistant coils rated up to IP69K
  • Wide voltage range
  • Coils are rated for continuous duty operation
  • Wide variety of voltages and molded-in connectors
  • Cartridges are voltage interchangeable
  • Manual overrides available on all models
  • Hardened poppet to ensure minimal wear and extend service life
  • One piece body design minimizes the effects of eccentricity
  • All exposed cartridge surfaces are zinc-plated to resist corrosion
  • Industry common cavity-compact size

Quote Request
Click to Enlarge

Model Series

  • WS06Y-01 Up to 5 gpm (19 l/min) • 5000 psi (350 bar)
  • WS08Y-01 Up to 10 gpm (38 l/min) • 5000 psi (350 bar)
  • WS10Y-01 Up to 20 gpm (75 l/min) • 5000 psi (350 bar)
  • WS12Y-01 Up to 29 gpm (110 l/min) • 5000 psi (350 bar)
  • WS16Y-01 Up to 40 gpm (150 l/min) • 5000 psi (350 bar)
  • WS08Y-30 Up to 8 gpm (30 l/min) • 5000 psi (350 bar)
  • WS08YR-01 Up to 10 gpm (38 l/min) • 5000 psi (350 bar)
  • WS10YR-01 Up to 20 gpm (75 l/min) • 5000 psi (350 bar)
  • WS12YR-01 Up to 29 gpm (110 l/min) • 5000 psi (350 bar)
  • WS16YR-01 Up to 40 gpm (150 l/min) • 5000 psi (350 bar)
  • WS08YR-30 Up to 8 gpm (30 l/min) • 5000 psi (350 bar)
  • WS06Z-01 Up to 5 gpm (19 l/min) • 5000 psi (350 bar)
  • WS08Z-01 Up to 10 gpm (38 l/min) • 5000 psi (350 bar)
  • WS10Z-01 20 gpm (75 l/min) • 5000 psi (350 bar)
  • WS12Z-01 Up to 29 gpm (110 l/min) • 5000 psi (350 bar)
  • WS16Z-01 Up to 40 gpm (150 l/min) • 5000 psi (350 bar)
  • WS08Z-01J Up to 10 gpm (38 l/min) • 5000 psi (350 bar)
  • WS08Z-30 Up to 8 gpm (30 l/min) • 5000 psi (350 bar)
  • WS08ZR-01 Up to 10 gpm (38 l/min) • 5000 psi (350 bar)
  • WS10ZR-01 Up to 20 gpm (75 l/min) • 5000 psi (350 bar)
  • WS12ZR-01 Up to 29 gpm (110 l/min) • 5000 psi (350 bar)
  • WS16ZR-01 Up to 40 gpm (150 l/min) • 5000 psi (350 bar)
  • WS08ZR-01J Up to 10 gpm (38 l/min) • 5000 psi (350 bar)
  • WS08ZR-30 Up to 8 gpm (38 l/min) • 5000 psi (350 bar)
  • WS08V-01 Up to 5 gpm (19 l/min) • 5000 psi (350 bar)
  • WS08W-01 Up to 5 gpm (19 l/min) • 3600 psi (250 bar)
  • WS10W-01 Up to 10.5 gpm (40 l/min) • 5000 psi (350 bar)
  • WS08W-30 Up to 5 gpm (19 l/min) • 3600 psi (250 bar)
  • WS08D-51 Up to 5 gpm (19 l/min) • 4000 psi (280 bar)

Poppet type valves are intended for use as load holding and blocking devices in hydraulic circuits requiring very low internal leakage. HYDAC offers a variety of Poppet type two-way and three-way normally closed or normally open unidirectional or bi-directional load holding and blocking valves. Models are available for flows up to 40 gpm (150 l/min) with pressure ratings up to 5000 psi (350 bar).

All HYDAC poppet valves are tested on an automated test stand measuring internal leakage by monitoring pressure decay, not counting drops per minute. HYDAC Poppet valves therefore provide reliable load holding and assure minimum pressure decay at the actuator.