Snap-Tite
CAD Dual Pilot Check Valve
CAD Dual Pilot Check Valve
Key Features
- 3500 psi (241 bar) 5000 psi (345 bar) intermittently
- Flow rates to 50 gpm (189 l/min)
- Anodized aluminum blocks, plated steel cartridges
- Three standard spring pressures
- Three sizes based on flow
- Pilot ratio - 4:1
The CAD dual pilot check valve features two CAC check cartridges in a single red anodized aluminum housing with standard ports to 1” in NPSF or SAE o-ring sealed. Flow into one of the valve ports is blocked until pressure overcomes the poppet spring. When the poppet is unseated, flow is permitted to the actuator; simultaneously the pilot piston on the actuated side unseats the opposite poppet to permit return flow through the valve.
Catalogs
CAD Dual Pilot Check Valve Catalog
146.4 kB