Parker Fluid Connector Group
P35 Series 5000 PSI Constant Working Pressure Hose
P35 Series 5000 PSI Constant Working Pressure Hose
Key Features
- Meets SAE 100R13, ISO 3862-1 Type R13 and EN 856 Type R13 specifications
- No-Skive design eliminates the need to remove the hose cover before crimping
- Approved with S6 Series fittings
- MSHA accepted cover
Parker's P35 hose is a large-bore 2-inch I.D. hose for high-pressure applications. Meets SAE 100R13, ISO 3862-1 Type R13 and EN 856 Type R13 specifications. And its No-Skive design eliminates the need to remove the hose cover before crimping.
Applications
- Transportation
- Construction
- Agriculture
- Grounds & Building Maintenance
- Forestry
- Utility Equipment
- Oil Field Service
- Waste & Refuse
- Mining
Media | Petroleum base hydraulic fluids and lubricating oils |
Maximum Working Pressure (psi) | 5000 |
Maximum Working Pressure (Mpa) | 35 |
Material - Hose Inner Tube | Synthetic rubber |
Material - Hose reinforcement | Four or six spiral steel wire |
Material - Cover | Synthetic rubber, MSHA accepted |
Minimum Bend Radius (inch) | Meets SAE requirements |
Minimum Bend Radius (mm) | Meets SAE requirements |
Working Temperature (F) Oil Minimum | -40 |
Working Temperature (F) Oil Maximum | +257 |
Working Temperature (C) Oil Minimum | -40 |
Working Temperature (C) Oil Maximum | +125 |
Meets Industry Standards | SAE 100R13, J1942 / ISO 3862-1 TYPE R13 / EN856 TYPE R13 / USCG HF / DNV / ABS / BV |
Compatible Fittings | S6 series |
Catalogs